High efficiency synthesis of Nd:YAG powder by a spray co-precipitation method for transparent ceramics

A spray co-precipitation method was developed to efficiently synthesize Nd:YAG nano-powders. The effects of spray speeds and solution concentrations on the crystallization processes of calcined precursors have been studied. The results indicated that the pure phase of YAG could be obtained by three different crystallization processes owing to different homogeneity levels of Y and Al mixing. Pure YAG powder was obtained at 850?°C and the phase purity persisted to 1600?°C. Using the obtained powders, transparent ceramics with the in-line transmittance up to 80.2%@400 nm and 83.1%@1064?nm were fabricated by gel-casting method and hot isostatic pressing sintering. Furthermore, the microstructure and laser properties of the transparent ceramics have been measured. The maximum laser output of 7.015?W has been obtained with an oscillation threshold and a slope efficiency of 0.235?W and 59.4%, respectively.     

Phase stability and thermo-physical properties of ZrO2-CeO2-TiO2 ceramics for thermal barrier coatings

The properties of ZrO₂ co-stabilized by CeO₂ and TiO₂ ceramic bulks were investigated for potential thermal barrier coating (TBC) applications. Results showed that the (Ce_0.15Ti_x)Zr_0.85-xO7 (x?=?0.05, 0.10, 0.15) compositions with single tetragonal phase were more stable than the traditional 8YSZ at 1573?K. These compositions also showed a large thermal expansion coefficient (TEC) and a high fracture toughness, which were comparable to those of YSZ. However, the phase stability, fracture toughness and sintering resistance of the CeO₂-TiO₂-ZrO₂ system showed a decline tendency with the increase of TiO₂ content. The TEC of the ceramic bulks decreased with increase of TiO₂ content as well because the crystal energy was enhanced with increasing substitution of Zr⁴⁺ by smaller Ti⁴⁺. The (Ce_0.15Ti_0.05)Zr_0.8O₂ had the best comprehensive properties among the (Ce_0.15Ti_x)Zr_0.85-xO₂ compositions as well as a low thermal conductivity. Therefore, it can be explored as a TBC candidate material for high-temperature applications.     

Effects of anion and cation doping on the thermoelectric properties of n-type PbS

The PbCl_xS_1-x and Pb_1-xBi_xS (x? =?0–0.05) bulks were fabricated with a facile method of hydrothermal synthesis and microwave sintering, and the effect of anionic and cationic donors on the thermoelectric performance of PbS was investigated. Although Cl^? and Bi³⁺ both effectively improved the thermoelectric properties of n-type PbS, more excellent thermoelectric performance was obtained from Cl^? doped samples because of higher electrical property and lower thermal conductivity at higher temperature (T? >?600?K). The thermoelectric figure of merit (ZT) reaches 1.04 for PbCl_0.015S_0.985 at 800?K and increases with temperature increasing without sign of saturation, which is probably the highest value ever reported for single-phase polycrystalline n-type PbS. The results also indicate that the hydrothermal synthesis and microwave sintering can realize anion doping as well as cation doping for n-type PbS at low cost, and PbS should be a robust alternative for PbTe thermoelectric materials.     

Polyurethane/doxorubicin nanoparticles based on electrostatic interactions as pH‐sensitive drug delivery carriers

In order to obtain a pH‐sensitive delivery carrier for doxorubicin (DOX), DOX‐loaded polyurethane (PU·DOX) nanoparticles were readily prepared in water by electrostatic interactions between amphiphilic polyurethane with carboxyl pendent groups (PU‐COOH) and doxorubicin hydrochloride (DOX·HCl). The structures of the products obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR spectroscopy, gel permeation chromatography, UV–visible spectroscopy, dynamic light scattering and transmission electron microscopy. The average hydrodynamic size of the PU·DOX nanoparticles was around 182 nm with negative surface charge (?1.1 mV) and a spherical or rodlike shape. PU·DOX nanoparticles had a higher drug‐loading content of 14.1 wt%. The in vitro drug release properties of PU·DOX nanoparticles were investigated at pH 4.0, 5.0 and 7.4, respectively. PU·DOX nanoparticles exhibited a good pH‐sensitive drug release property, but there was almost no release of DOX from PU·DOX nanoparticles at pH 7.4. The in vitro cellular uptake assay and the Cell Counting Kit‐8 assay demonstrated that PU·DOX nanoparticles had a higher level of cellular internalization and higher inhibitory effects on the proliferation of human breast cancer (MCF‐7) cells than pure DOX. The enhancement of the inhibition effects resulted from increasing apoptosis‐inducing effects on MCF‐7 cells, which was related to the enhancement of Bax expression and the reduction of Bcl‐2 expression confirmed by terminal deoxynucleotidyl transferase mediated dUTP nick end labeling (TUNEL) assay, real‐time polymerase chain reaction (PCR) assay and western blot assay. © 2018 Society of Chemical Industry     

Application of Mono‐ and Disaccharides in Drug Targeting and Efficacy

Carbohydrates and their conjugates play important roles in many biological processes including fertilization, differentiation, development, immune response, and infection. Their activities are largely dependent on the properties of terminal mono‐ or disaccharides. Galactose, mannose, fucose, glucose, sialic acid, etc., are commonly used as powerful scaffolds installed on drug molecules for targeting specific tissues including brain, liver, and cancers, and as epitopes for enhancing the targeting of various vaccines. This review focuses on the influence of their structural variations, including changes in sugar type, substituent groups and their positions, as well as length of linker portion, on the targeting of drugs or their efficacy. Particular attention is paid to the targeting properties of mono‐ and disaccharides applied in drug design and discovery.     

综放工作面风量及采空区漏风定量检测

通过对中煤塔山煤矿30509综放工作面采空区漏风及有害气体分析的研究，总结了通过定量连续释放SF₆示踪气体，来检测工作面风量与采空区漏风的方法，测定了沿工作面采空区的漏风分布及漏风流线的深度。采用定时测量法，确定了30509工作面随工作面不断推进，与对应地表发生了导通现象；采用定量测量法，确定了内部漏风量和外部漏风量较大，对综采工作面采空区自然发火存在较大风险，同时提出了防范措施，为减少综放工作面采空区漏风、防止自然发火的发生提供了参考。     

可控中子孔隙度测井仪器设计

源距与屏蔽体厚度是直接影响可控中子孔隙度测井仪器测量准确性的重要参数。源距不仅影响测井仪器的测量误差，还影响测井仪器对地层孔隙度的灵敏度。屏蔽体厚度是保障测井响应完全反映地层的重要参数。从灵敏度、屏蔽率以及误差3个方面确定可控中子孔隙度测井仪器的源距与屏蔽体厚度。研究结果表明:近探测器源距越小，测井仪器灵敏度越高；近远探测器的间距对测量误差的影响随间距的增大，先减小再增大；当屏蔽率在70%以上且屏蔽率随厚度的变化较为缓慢时的屏蔽体厚度可作为屏蔽体最低厚度。     

A Bio‐Inspired and Biomass‐Derived Healable Photochromic Material Induced by Hierarchical Structural Design

Utilization of bionics to develop stimuli responsive polymers that can heal damage with excellent restorability is particularly attractive for a sustainable society. Herein, inspired by chameleons, a hierarchical structural design strategy is proposed and illustrated to fabricate a healable photochromic material based on a self‐healable polymeric matrix and a finely dispersed photochromic spirooxazine. The self‐healable polymeric matrix is fabricated via the integration of multiple hydrogen bonds (H bonds) and covalent cross‐links into a biomass‐derived elastomer. The dynamic nature and soft characteristics enable the as‐prepared elastomer superior extensibility as well as self‐healing ability, while the covalent cross‐links can assist the reassociation of ruptured H bonds. The representative elastomer exhibits an extensibility of 2600% and toughness of 42.76 MJ m^?3. Furthermore, it shows good self‐healing ability with complete recovery of scratch as well as restoration against 1900% of elongation and 24.1 MJ m^?3 of toughness after healing at 60 °C for 24 h. This combination of moderate toughness, good self‐healing ability, and smart photochromic property in biomass‐derived materials should largely improve their applicability, reliability, and sustainability in various materials and devices.     

扩散时间对W在TiAl合金中扩散行为的影响

通过光学显微镜、扫描电镜和硬度测试等分析手段研究了在1250 ℃下扩散保温不同时间对W元素在TiAl合金中扩散行为的影响。结果表明:试样在1250 ℃下进行扩散不同时间后,渗层界面处连接良好,可观察到明显的冶金结合。扩散层厚度随扩散时间的延长而增加,扩散4 h后可得到约15 μm厚的渗层,扩散24 h后可得到约45 μm厚的渗层,此外较长的扩散时间(24 h)可显著改善界面处的裂纹和气孔等缺陷。W在TiAl合金中的扩散机制主要为置换和空位扩散,且W和Ti的原子半径和热膨胀系数等存在差异,使得晶格畸变的出现并进一步阻碍了W元素的扩散。显微硬度试验结果表明W在TiAl合金中进行扩散,可以增强TiAl合金的硬度,且硬度值随W含量的增大而增大。     

Effect of intermetallics on susceptibility of Mg alloy welds to liquation cracking

ABSTRACT

The circular-patch welding test was used to study the liquation and liquation cracking of AZ-series Mg alloys. A heat treatment was carried out on the as-received AZ91 alloy to dissolve the γ(Mg₁₇Al₁₂) particles before welding. The circular-patch welding test was then conducted on the heat-treated, as-received AZ91 alloy using AZ61 and AZ91 filler wires. The results showed that the susceptibility of AZ91 alloy to liquation and liquation cracking was significantly reduced by the dissolution of massive γ(Mg₁₇Al₁₂) particles via a heat treatment before welding as the liquation mechanism was changed. Both constitutional liquation and incipient melting occurred in the partially melted zone of the as-received AZ91 welds, while only incipient melting occurred in the heat-treated AZ91 welds.